I-Zhongdi ZD-8906N 25W/30W Solder 550℃ I-Superiro Heating Performance LCD Temperature Bonisa I-Soldering Iron

I-Zhongdi ZD-8906N 25W/30W Solder 550℃ Ukusebenza Kwe-Superiro Heating LCD Izinga lokushisa Lokuboniswa Kwe-Soldering Iron Isithombe Esifakiwe

Incazelo emfushane:

Imodeli: ZD-8906N

•Isifudumezi: Ceramic, 160° C – 480°C (25W), 160°C – 520°C (30W)
•Cindezela inkinobho phezulu/phansi ukuze uthole ukulungiselelwa kwezinga lokushisa ngesibonisi se-LCD.
•Ukusebenza okuphezulu kokushisisa ngesici sokushisa se-ceramic esithuthukisiwe, okungcono kakhulu kunezifudumezi zendabuko.
•Ishisa ngokushesha futhi igcine iphuzu elimisiwe ngokunembile.
•Kuhlanganisa insimbi yokunamathisela ebambe irabha, isipontshi nedrowa lamathiphu ayisipele.
•Ngethiphu ekhonjiwe kakade ifakiwe.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izici:

Imininingwane

Ikhodi	Amandla kagesi	Amandla	Insimbi eyisipele	I-heater eyisipele	Ithiphu
89-060A	110-130V	25W	I-ZD-417C	78-417C	Inani eliphakeme kakhulu lama-N9
89-060B	220-240V	25W		78-417D
89-0607	110-130V	30W		78-417C
89-0608	220-240V	30W		78-417D

8906 (1) 8906 (2)

Ukusebenza

• Khipha isiteshi sokunamathisela bese uhlola zonke izingxenye.Izingxenye ezilimele akufanele zisetshenziswe.
•Faka indawo yokubeka insimbi bese umanzisa isipontshi sokuhlanza ngamanzi.
•Faka insimbi yokunamathisela endaweni yokubeka.
•Beka i-soldering station endaweni eqinile neyomile
•Xhuma i-soldering station bese uyivula (I=ON/0=OFF).Isikrini se-LCD sizobonisa izinga lokushisa elimisiwe elingu-300℃.
•Bese ucindezela inkinobho ethi “+” noma “-” ukuze ulungise izinga lokushisa.Ukucindezela ngakunye kuzoba ngu-+/- 10℃.I-ayina e-soldering izofinyelela izinga lokushisa elibekiwe emizuzwini eyi-10.
•Hlola izinga lokushisa ngokuthinta ichopho lensimbi nge-solder.Uma i-solder incibilika kalula, ungaqala ukuhlanganisa.
• Thinta ithiphu lensimbi eshisayo nge-solder;sula i-solder ngokweqile ngesipontshi sokuhlanza esimanzi.
•Shisisa iphoyinti ngensimbi bese wengeza i-solder.
•Linda kuze kuphole i-solder.
•Hlanza ithiphu ngesipontshi esimanzi ngemva kokusoda ngakunye.
•Ngemva kokuqeda umsebenzi, buyisela i-ayina yokunamathisela endaweni ukuze iphole futhi uvale indawo yokunamathisela.
•Ukuze uthole amathiphu amakhudlwana wokunamathisela, finyelela kuzilungiselelo zokushisa eziphakeme ukuze wenze ukusoda kangcono.
•Yehlisa izinga lokushisa ngesikhathi sekhefu, okonga amandla futhi andise impilo yethiphu yokunamathisela.
•Ungacoshi ithiphu yokusoda, noma izolimala.
•Hlala ubeke i-ayina yokunamathisela endaweni lapho ifudumala noma ngesikhathi sekhefu.
•Sebenzisa i-solder yezinto zikagesi kuphela.I-Acidic solder ingalimaza ithiphu noma i-workpiece.